Chapter 17
Using the CLI
Viewing the Event and Shutdown Logs
Using the Web
Agent
17-12
Table 17-4. Protocol Event Management Dialog Box Parameters
Column
Parameter
Heading
Trace
Select Enable to display RIP and OSPF packet tracing.
The default is Disable.
Debug
Select Enable to display event messages used to
troubleshoot a network problem. The default is
Disable.
6. Click APPLY to save your changes, or CANCEL to restore
previous settings.
To configure the protocol event log using the CLI, enter the
following command from Configuration mode:
<configure># logging protocol event <protocol>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can view the Event and Shutdown logs using either the Web
Agent or the CLI.
To view the Event and Shutdown logs using the Web Agent:
1. Select either Event Log or Shutdown Log from the Events
group on the Web Agent window. The Event Log Search
dialog box (Figure 17-5) or the Shutdown Log Search
dialog box opens (Figure 17-6).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
2 of 2