Using The All Ports Configuration Window - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Using the All Ports Configuration Window

To configure ports on a Fast Ethernet module using the CLI, enter

the following command from Configure mode:

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, Version 5.3.1 for more details about this

You can apply the same parameter settings on all of a module's ports

using the All Ports Configuration dialog box.

To configure all ports on a module:

1. Select Configuration from the Modules & Ports group on

the Web Agent window. The Module Information dialogue

box opens (Figure 5-1).

2. Select the port number from the Ports column for that

module. The Physical Port Configuration dialog box for that

module opens (Figure 5-2 for Gigabit modules and Figure 5-4

for 10/100 modules).

3. Select All Module Ports Configuration. The All Ports

Configuration dialog box opens (Figure 5-6).

Figure 5-6. All Ports Configuration Dialog Box

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1

P550r P580 P880