Chapter 16
Using the CLI
Viewing IGMP Snooping Statistics
Using the Web
Agent
Using the CLI
Managing the LGMP Server
16-22
To enable IGMP Snooping using the CLI, enter the following
command from Configure mode:
(configure)# set igmp-snooping enable
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can view IGMP snooping statistics using either the Web Agent
or the CLI.
To view IGMP snooping using the Web Agent:
1. Select IGMP Snooping from the L2 > Intelligent
Multicast group on the Web Agent window. The IGMP
Snooping dialog box opens (Figure 16-11).
2. Refer to Table 16-8 for an explanation of the IGMP
Snooping dialog box parameters:
3. Click:
CLEAR to clear the statistics.
—
REFRESH to refresh the contents of the table.
—
To configure IGMP snooping using the CLI, enter the following
command from Configure mode:
(configure)# show igmp-snooping statistics
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
This section provides the following procedures for managing the
Lucent Group Management Protocol (LGMP) Server:
Configuring the LGMP Server
Viewing the LGMP Server Statistics
Viewing the LGMP Server Statistics per VLAN
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1