Setting Up Cbq - Avaya Cajun P882 User Manual

Setting Up CBQ

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Use the set port queue service cbq command to set a port, port
range, or module to use class-based queuing (CBQ) queue servicing.
The syntax of the command is:
Avaya(configure)# set port queue service {{<mod-num> | <mod-
swport-range>} [..., {<mod-num> | <mod-swport-range>}] | all-
ports} cbq queue <queue> bit-rate <rate>
Table 21-23. Keywords, Arguments, and Options
Keyword, Argument
or Option
<mod-num>
<mod-swport-range>
all-ports
<queue>
Definition
The slot number of a module. If you
specify <mod-num>, all ports on the
module are set to use CBQ.
The slot number of a module, and, either
a port number, or a range of port
numbers having the format Px-Py. For
example:
• To specify port 1 on the module in
slot 3, enter 3/1.
• To specify ports 1 through 5 on the
module in slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the
port or range of ports that you specify is
set use CBQ.
All ports in the chassis. If you specify all-
ports, all ports on all modules in the
chassis are set to use CBQ.
The queue number, which can range
from 0 to 7.
80-Series QoS
1 of 2
21-41