Avaya Cajun P882 User Manual page 431

Using the CLI
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Table 11-6. OSPF Statistical Parameters continued
Parameter Displays the...
Area ID Area ID of the area in question. It has the function
of defining a summarization point for Link State
Advertisements.
SPF Runs Number of times that the intra-area route table has
been calculated using this area's link-state database.
Border Rtrs Total number of area border routers reachable
within this area. This is initially zero, and is
calculated in each SPF Pass.
AS Border Total number of Autonomous System border
Rtrs routers reachable within this area. This is initially
zero, and is calculated in each SPF Pass.
LSAs Total number of link-state advertisements in this
area's link-state database, excluding AS External
LSAs.
LSA Chksum 32-bit unsigned sum of the LS checksums of the
Sum external link-state advertisements contained in the
(per area, not link-state database. This sum can be used to
globally) determine if there has been a change in a router's
link state database, and to compare the link-state
database of two routers.
3. Click Refresh to reset the counters with the latest
information.
To display the OSPF global statistics using the CLI, enter the
following command in Enable mode:
># show ip ospf stats
># show ip ospf virtual-links
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3 for details about this command.
Configuring the OSPF Routing Protocol
11-23