Avaya Cajun P882 User Manual page 63

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1
Figure 2-1. Avaya P550R/P580 Multiservice Switch Front View
Supervisor Module
front panel
2. Run a terminal emulation program (HyperTerminal, for
example) on the attached laptop or PC. Verify that the laptop
or PC monitor settings match those listed in Table 2-1.
3. Power up the switch. The switch displays the following
startup messages in the terminal emulation program:
Booting the operational system, please wait....
Initializing the file subsystem... done
Initializing the event subsystem... done
Initializing the agent subsystem... done
Initializing the platform... done
Initializing the switch subsystem... done
Starting up threads...
Periodic Task
Event
Network Interface
Switch Interface
Telnet Processes
Ping Process
Module Manager
Address Table Aging
Multicast Pruning
Front Panel Display
Download
Fans Poller
Power Supplies Poller
VTP Snooping
Redundant Controller/Element Poller Task
Command Line Parser
Powering up modules
Module 1 Powered
Initialize and Setup
Attach serial port
cable here
(console port)
Attach Ethernet
cable here (10Base-T
or 10/100Base-T)
2-5