Modifying Ospf Areas - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Using the CLI

Modifying OSPF Areas

Using the Web

Using the CLI

To delete an OSPF area using the CLI, enter the following command

in Enable/Configure mode:

* Note: Before deleting an OSPF area, assign any interfaces that

are associated with the area to a different area or delete

the interfaces.

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, v5.3 for details about this command.

You can modify the parameters of an OSPF area using either the

Web Agent or the CLI.

To modify an OSPF area using the Web Agent:

1. Select Areas from the Routing > IP > OSPF group on the

Web Agent window. The OSPF Areas dialog box opens

(Figure 11-2).

2. Select an OSPF Area to be modified from the Select field.

3. Refer to Table 11-2 and modify the OSPF Area dialog box

4. Click Apply to save your changes, or Cancel to ignore your

To modify an OSPF area using the CLI, enter the following

command in Enable/Configure mode:

>(configure router ospf)# area <area-id> <option>

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, v5.3 for details about this command.

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1

P550r P580 P880