Modifying A Custom Access Type - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Custom Access

Types with the

Modifying a Custom Access Type

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version 5.3.1

Select which features that you want this access type to

support from the Accessible Features list.

5. Select Apply to save the Access Type or Cancel to ignore the

Access Type.

To create a Custom Access Type using the CLI, enter the following

command in Configuration mode:

<configure># custom-access-type <catName> [sys-

configuration] [module-port-mgmt] [events-mgmt

] [l2-switching] [routing]

To modify a Custom Access Type:

1. Open the Custom Access Types web screen (refer to the

"Opening the Custom Access Types Web Page" section earlier

in this section).

Select an access type name from the Type Name field.

Select Modify from the Custom Access Types web

screen. The Modify Custom Access Type web screen

displays with the name of the access type you want to modify

displayed in the Type Name field (Figure 2-9).

Initialize and Setup

P550r P580 P880