Setting The Startup Image - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Setting the Startup Image

4. In the File Name field, enter one of the following:

m5500r_v5.03.01.bin to download version 5.3.1 for the

P550R switch (layer 3)

m8000r_v5.03.01.bin to download version 5.3.1 for the

P580 switch (layer 3)

m8800_v5.03.01.bin to download version 5.3.1 for the

m8000r_v5.03.01.bin to download version 5.3.1 for the

5. In the TFTP Target Section field, select the memory

location to which you want to download the new application

6. In the Perform Update Now field, select Update.

7. In the Get Status of Most Recent Update field, select

Status to verify that the new image downloaded properly.

The status of the update is displayed in the TFTP Update

Status pane.

To download new application software from a TFTP server to an APP

memory location by using the CLI, use the following command:

(configure)# copy tftp flash {app1 | app2}

{cardapp1 | cardapp2} <image_opt_path> <ip-addr>

For more information on this command, see Chapter 29, "System,"

in the Command Reference Guide for the Avaya P550R, P580, P880, and

P882 Multiservice Switches.

After you download the new software, you must set the switch to

load the new software at startup. You can use either the Web Agent

or CLI to perform this task.

To set the switch to load the new software at startup:

1. In the navigation pane, expand the System > Memory

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

P550r P580 P880