Avaya Cajun P882 User Manual page 185

Multiservice switch
Hide thumbs Also See for Cajun P882:
Table of Contents

Advertisement

VLAN
Binding
Static
Bind to All
Bind to All
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1
Table 5-2. Relationship Between Switch Parameters
Trunk
Description
Mode
802.1Q
Ingress: Untagged frames are classified to the VLAN
associated with the port on which the frame is
Multi-
received. Tagged frames are classified to the VLAN
layer
identified by the VLAN tag in the tag header of the
frame.
Forwarding: Only forward frames to the port for the
assigned VLAN.
Egress: All frames transmitted out of the port will be
tagged using the IEEE 802.1Q/Multi-Layer tag header
format. The tag used will be that assigned to the port.
Clear
NOT RECOMMENDED
Ingress: Untagged frames are classified to the VLAN
associated with the port on which the frame is
received. Tagged frames are classified to the VLAN
identified by the VLAN tag in the tag header of the
frame.
Forwarding: All broadcast frames from all VLANs will
be forwarded to the port.
Egress: All frames transmitted will be sent with no
tagging.
802.1Q
Ingress: Untagged frames are classified to the VLAN
associated with the port on which the frame is
Multi-
received. Tagged frames are classified to the VLAN
layer
identified by the VLAN tag in the frame's tag header.
Note:
All broadcast frames from all VLANs will be forwarded
to the port.
Egress: All frames transmitted out of the port to be
tagged using the IEEE 802.1Q/Multi-Layer tag header
format. The tagged used will be that of the VLAN in
which the frame was received.
Configuring Port Parameters
For 802.1q mode: if a tagged frame is received,
but the VLAN for that tagged frame does not
exist on the switch, that frame will be placed
onto the port VLAN assigned to the port. This
may cause unicast and broadcast VLAN traffic
from other VLANs to be seen on the port
VLAN. To avoid this behavior, you can set the
port VLAN into the "discard" VLAN which will
drop all untagged frames and tagged frames
with unknown VLAN IDs. For Multi-layer: if a
tagged frame is received, but the VLAN for that
tagged frame does not exists on the switch,
that frame will be dropped.
Forwarding:
2 of 3
5-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

P550rP580P880

Table of Contents