Relationship Between Different Switch Port Parameters - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Relationship Between Different Switch Port Parameters

Setting the VLAN Binding attribute in the Switch Port

Configuration dialog box to Bind to All. This causes the port to

be bound to all VLANs known to the switch (now and in the

future). This is not recommended when the switches on both

ends of the link function as a router. This setting should be used

on links that connect two Layer 2 switches. Refer to the Avaya

P550R, P580, P880, and P882 Multiservice Switch User Guide,

Version 5.3.1 for more details

Setting the VLAN Binding attribute in the Switch Port

Configuration dialog box to Bind to Received. This causes the

port to be bound to all VLANs identified by the VLAN tag in IEEE

802.1Q and Multi-Layer tagged frames received on this port.

Consequently, ports are bound to those VLANs that actually

have members that are reachable through the port.

Manually creating a VLAN Switch Port via the Web Agent or CLI.

Table 5-2 shows the relationship between Port VLAN / Trunk Mode

/ VLAN Binding parameters when using the VLAN Operational

Table 5-2. Relationship Between Switch Parameters

Ingress: Untagged frames are classified to the VLAN

associated with the port on which the frame is

received. Tagged frames are classified to the VLAN

identified by the VLAN tag in the tag header of the

Forwarding: Only forward frames to the port for the

assigned VLAN.

Egress: All frames transmitted will be sent with no

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, Version v5.3.1

P550r P580 P880