Chapter 12
IPX Datagram Structure
12-2
The IPX datagram contains an IPX header and any data to be
transferred on the network. The IPX header is a 30 byte header that
contains 10 fields. Figure 12-1 illustrates a conceptual view of an
IPX datagram:
Figure 12-1. IPX Datagram in Detail
Checksum (2 bytes)
Packet Length (2 bytes)
Transport Control (1 byte)
Packet Type (1 byte)
Destination Network (4 bytes)
Destination Node (6 bytes)
Destination Socket (2 bytes)
Source Network (4 bytes)
Source Node (6 bytes)
Source Socket (2 bytes)
Refer to Table 12-1 for a description of the IPX datagram Structure
fields:
Table 12-1. IPX Datagram Structure Fields
Field
Definition
Checksum
Provides integrity checking.
Note:
Packet Length
Length (in bytes) of the packet.
Transport
Number of routers a packet has traversed. This is
Control
used to discard a packet if the packet traverses a
maximum number of routers (16).
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
Checksum is normally not enabled in IPX
networks and is usually set to 0xFFFF.
30 Bytes