Using the CLI
Editing AppleTalk Static Routes
Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
4. Click APPLY to add the static route, or CANCEL to restore
previous settings. When you click APPLY, you are returned
to the AppleTalk Static Route dialog box.
To create an AppleTalk static route using the CLI, enter the
following command in Interface mode:
(config if-<interface-name>:)# appletalk static
cable-range <cable-range> to <network.node>
[floating] zone <zone-name>
Refer to the Command Reference Guide for the Avaya P550R, P580, P880,
and P882 Multiservice Switches, v5.3.1 for details about this command.
You can edit AppleTalk Static routes using either the Web Agent or
the CLI.
To edit an AppleTalk static route using the Web Agent:
1. Select Static Route from the Routing > AppleTalk >
Configuration group on the Web Agent window. The
AppleTalk Static Route dialog box opens
(Figure 15-8).
Figure 15-10. AppleTalk Static Routes
2. If you need to Add or Delete Zones, select Edit Zone
otherwise, skip to step 4. The Edit AppleTalk Zone dialog
box opens (see Figure 15-11)
Configuring AppleTalk Routing
15-13