Enabling Ip Forwarding (Routing) Global Parameters - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Using the CLI

Enabling IP Forwarding (Routing) Global Parameters

Routing Using

the Web Agent

Table 9-1. Add IP Interface Web Page Fields

Allows you to...

Enable or disable Virtual Redundancy Router

Protocol. The default value is Disable.

Enable or disable the BOOTP/DHCP Relay Agent.

Relay Gateway

The default value is Enable.

Using the CLI to create an IP interface requires two CLI commands.

1. Enter Configure mode.

2. Create an Interface Name first.

<configure># Interface <Interface_name> type <ethernet or nbma>

Example: Interface myif type ethernet

3. Assign an IP address to the interface.

<confg-if:myif># IP Address <ip-address> <network mask>

Example: (config-if:myif)# ip address 192.168.97.1 255.255.255.0

Refer to the Command Reference Guide for the Avaya P550R, P580, P880,

and P882 Multiservice Switches, Version 5.3.1 for details about this

You can enable IP Unicast Forwarding (Routing) Globally using

either the Web Agent or the CLI.

To enable IP routing using the Web Agent:

1. Select Global Configuration from the Routing > IP >

Configuration group on the Web Agent window. The IP

Global Configuration dialog box opens (Figure 9-4).

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

P550r P580 P880