Configuring The Ip Interface For The Ppp Console - Avaya Cajun P882 User Manual

Configuring the IP Interface for the PPP Console

Using the Web
Agent
Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1
You can configure an IP interface for the PPP console from either
the Web Agent or the CLI.
To configure the PPP console with an IP address and mask using the
Web Agent:
1. Configure your console serial port as a PPP Console. See
"Connecting a Modem", in Chapter 2, "Initialize and Setup".
2. Connect your modem cable to the switch's serial port.
3. Select Interfaces from Routing > IP > Configuration on
the Web Agent window. The IP Interfaces dialog box opens
(Figure 9-38).
4. Select CREATE. The Add IP Interface dialog box opens
(Figure 9-47).
Configuring IP Routing
9-111