Removing The Registration Drive Unit - Canon imageRUNNER C1335 Series Service Manual

4
Disassembly/Assembly > Image Formation System > Removing the Registration Drive Unit > Procedure
NOTE: How to assemble the Secondary Transfer Outer Roller Guid Unit
When assembling, insert the protrusion [A] of the Secondary Transfer Outer Roller Guid
Unit into the groove [B] of the Right Cover Unit, and insert the protrusion [C] between
the groove [D] of the Lock Guide and the spring [1] to install the unit.
Align the groove [E] of the Lock Guide with the protrusion [F] of the Right Cover Unit to
lock the claw [2].
[D] [C]
[1]
[B]
[A]
4 Disassembly/Assembly > Image Formation System > Removing the Registration Drive Unit > Procedure
1x
■ Preparation
[E]
1) Remove the Front Cover(Refer to page 4-33).
2) Remove the Right Front Cover(Refer to page 4-37).
3) Remove the Waste Toner Container(Refer to page 4-108).
[2] [F]
■ Procedure
1) Remove the Front Inner Lower Cover [1].
• 2 Screws [2]
• 4 Claws [3]
• 2 Bosses [4]
• 1 Hook [5]
F-4-311

Removing the Registration Drive Unit

[5]
2x
4x
[2] [4]
4-123
F-4-312
[3] [4] [1]
[2]
F-4-313
4-123