Canon imageRUNNER C1335 Series Service Manual page 422

Error Detail
Item
code Code
E733 0F00 Title Printer communication error
Description A communication error that can be recovered by reboot.
If it is detected again after reboot, E733-0000 is generated.
Remedy [Remedy] It is not necessary to perform a remedy because the machine is
automatically rebooted after log collection.
E733 0F01 Title Printer communication error
Description A communication error that can be recovered by reboot.
If it is detected again after reboot, E733-0001 is generated.
Remedy [Remedy] It is not necessary to perform a remedy because the machine is
automatically rebooted after log collection.
E733 0F02 Title Printer communication error
Description A communication error that can be recovered by reboot.
If it is detected again after reboot, E733-0002 is generated.
Remedy [Remedy] It is not necessary to perform a remedy because the machine is
automatically rebooted after log collection.
E733 F001 Title Printer communication error
Description Disconnection of the Flexible Cable between the Main Controller PCB and
the DC Controller PCB was detected.
Remedy [Remedy] Check/replace the Flexible Cable between the DC Controller
PCB (UN04/J112) and the Main Controller PCB (UN81/J7001) (unit of
replacement: CABLE, FLAT).
E733 F002 Title Printer communication error
Description Disconnection of the Flexible Cable between the Main Controller PCB and
the Y/M/C/Bk Laser Driver PCB was detected.
Remedy [Remedy] Check/replace the Flexible Cable between the Y/M/C/Bk Laser
Driver PCB (UN05/J201) and the Main Controller PCB (UN81/J7002). (Unit
of replacement: CABLE, FLAT)
E736 0000 Title Error in CCU communication
Description Error in CCU-modem communication
Remedy 1.Update the set of main controller firmware
2.Replace FAX-NCU PCBs3.Replace main controller PCBs
E736 0001 Title Error in ROM for backing up fax data
Description An error occurred in ROM for backing up fax data
Remedy 1. Install the set of the controller firmware.
2. Replace the Main Controller PCB.
E743 0000 Title DDI communication error
Description Software sequence error
Remedy [Remedy] Collect debug log and contact to the sales company.
E744 0001 Title Error in language file/BootRom/USB memory
Description Error in language file versionThe version of language file does not match
to Bootable
Remedy Update the set of main controller firmware
E744 0002 Title Error in language file/BootRom/USB memory
Description The size of the language file exceeded the upper limit.
Remedy Install the set of the controller firmware.
7
Error•Jam•Alarm > Error Code > Error Code Details
Description
7 Error•Jam•Alarm > Error Code > Error Code Details
Error Detail
Item
code Code
E744 1001 Title Error in language file/BootRom/USB memory
Description Version of the main program and the version of the start-up program was
not matched.
Remedy Install the set of the controller firmware.
E744 4000 Title Error in language file/BootRom/USB memory
Description Error in engine IDDetected illegal engine connection
Remedy 1.Check DC controller2.Update DC controller firmware3.Update the set of
main controller firmware
E744 5000 Title Error in language file/BootRom/USB memory
Description Error in panel microcomputer
Remedy 1.Check panel microcomputer to upgrade the version2.Update the set of
main controller firmware3.Replace main controller PCBs
E744 6000 Title Communication error with the Wireless LAN PCB
Description Unable to communicate with the Wireless LAN.
Remedy 1. Turn OFF and then ON the main power. 2. Check the connection of the
Wireless LAN. 3. Install the set of the controller firmware. 4. Replace the
Main Controller PCB.
E744 7000 Title Main Controller PCB error
Description An error in the microcomputer which retains fax job information of the Main
Controller PCB.
Remedy 1. Install the firmware of BKUP. 2. Install the set of the controller firmware. 3.
Replace the Main Controller PCB.
E746 0000 Title Error in main controller PCBs
Description Communication error occurred in main controller PCB (other than scanner-
related)
Remedy Replace main controller PCBs
E766 xxxx*1 Title Error in firmware
Description Error in connection occurred due to main controller software
*: xxxxTask number related to Exception is shown in decimal
Remedy 1.Power off/on2.Update firmware
E766 8000 Title Error in firmware
Description Incorrect digital registration 3 point information
Remedy 1.Power off/on2.Update firmware
E766 9000 Title Error in firmware
Description Error in laser scanner unit power supply
Remedy 1.Power off/on2.Update firmware
7-51
Description
7-51