Table of Contents
Advertisement
COPIER> ADJUST> CCD
OFST-CL4
Adj CIS-ch4 offset: color mode, 300 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 4 in
color mode with 300 dpi.
This setting is not available for a 25-ppm machine.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST-CL5
Adj CIS-ch5 offset: color mode, 300 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 5 in
color mode with 300 dpi.
This setting is not available for a 25-ppm machine.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST2CL0
Adj CIS-ch0 offset: color mode, 600 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 0 in
color mode with 600 dpi.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST2CL1
Adj CIS-ch1 offset: color mode, 600 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 1 in
color mode with 600 dpi.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
8
Service Mode > COPIER > ADJUST > CCD
8
Service Mode > COPIER > ADJUST > CCD
COPIER> ADJUST> CCD
OFST2CL2
Adj CIS-ch2 offset: color mode, 600 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 2 in
color mode with 600 dpi.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST2CL3
Adj CIS-ch3 offset: color mode, 600 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 3 in
color mode with 600 dpi.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST2CL4
Adj CIS-ch4 offset: color mode, 600 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 4 in
color mode with 600 dpi.
This setting is not available for a 25-ppm machine.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST2CL5
Adj CIS-ch5 offset: color mode, 600 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 5 in
color mode with 600 dpi.
This setting is not available for a 25-ppm machine.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
8-34
8-34
Advertisement
Table of Contents
Troubleshooting
