Micard Attachment Kit-A1; Checking The Contents; Points To Note At Installation; Check Items When Turning Off The Main Power - Canon imageRUNNER C1335 Series Service Manual

MiCARD Attachment Kit-A1

Checking the Contents

[1] IC-Card Reader Base [2] Screw (TP; M4x16)
X 1 X 1
[4] Wire Saddle [5] Wire Saddle
(Medium) X 1 (Small) X 2
[7] Cord Guide X 1 [8] Cord Clamp X 4
[10] USB Hub [11] Ring Core X 1
Relay Harness X 1
9
Installation > MiCARD Attachment Kit-A1 > Installation Outline Drawing
[3] Wire Saddle
(Large) X 2
The MiCARD Attachment Kit-A1/ Card Reader (sales company's option) and the Copy Card
Reader-F1 cannot be used at the same time.
[6] Right Cover
Support Plate X 1
Check that the main power switch is OFF.
1) Turn OFF the main power switch.
2) Check that the display in the Control Panel and the lamp of the main power are turned off,
then disconnect the power plug.
[9] USB Hub Unit X 1
[12] Reuse Band X 1
F-9-19
9 Installation > MiCARD Attachment Kit-A1 > Installation Outline Drawing
[11] Screw (TP; M3x6)
X 1

Points to Note at Installation

Check Items when Turning OFF the Main Power

Installation Outline Drawing

9-9
[12] Screw (TP; M4x8)
X 1
F-9-20
F-9-21
9-9