Canon imageRUNNER C1335 Series Service Manual page 597

16) Install the Card Reader Mounting Plate (rear) Unit to the host machine.
• 2 Screws (W Sems; M3x14)
2x
W Sams
M3x14
17) Install the Card Reader Mounting Plate (front) Unit to the Card Reader (rear) Unit.
• 4 Screws (TP; M3x6)
4x
TP
M3x6
9
Installation > Copy Card Reader-F1 > Installation Procedure
18)
machine, and install the Connector Cover.
• 1 Screw (TP: M3x6)
NOTE :
To ensure that the connector does not become disconnected, be sure to place the tie-
wrap of the Card Reader External Relay Harness on the inside of the Connector Cover.
F-9-69
TP
M3x6
F-9-70
9 Installation > Copy Card Reader-F1 > Installation Procedure
Connect the connector of the Card Reader External Relay Harness to the host
1x
9-25
F-9-71
1x
F-9-72
9-25