Canon imageRUNNER C1335 Series Service Manual page 312

4
Disassembly/Assembly > Pickup/Feed System > Removing the Registration/Pickup Unit > Procedure after replacement When images with uneven density (white spots) are generated after re
CAUTION:
• Be sure not to touch the surface [A] of the roller when disassembling/assembling.
[A]
• If the Registration Roller [2] and the Pre-registration Roller [1] are replaced
separately, not simultaneously, it may generate a difference in feeding speed and
cause feeding problems such as geometrical characteristics and jams.
[2]
[1]
4 Disassembly/Assembly > Pickup/Feed System > Removing the Registration/Pickup Unit > Procedure after replacement When images with uneven density (white spots) are generated after re
[A]
[A]
F-4-425
F-4-426
Procedure when images with uneven density (white spots) are generated on the front side
1) Remove the Right Cover Stopper Front [1] and the Right Cover Stopper Rear [2].
• 2 Hooks [3]
• 2 Shafts [4]
[1]
4-162
F-4-427
[4]
[3]
[2]
F-4-428
4-162