Canon imageRUNNER C1335 Series Service Manual page 248

4
Disassembly/Assembly > Controller System > Removing the Touch Panel/Control Panel CPU PCB Unit /LCD Unit > Procedure
1) Remove the Control Panel Rear Cover [1].
• 4 Screws [2]
4x
[1]
2) Remove the Control Panel Support Plate [1].
• 4 Screws [2]
4x
[1]
4 Disassembly/Assembly > Controller System > Removing the Touch Panel/Control Panel CPU PCB Unit /LCD Unit > Procedure
[2]
F-4-235
[2]
F-4-236
3) Remove the Control Panel CPU PCB Unit [1].
• 2 Flat Cables [2]
• 5 Screws [3]
Note: How to remove the Flat Cable
There are 2 types of Flat Cables on the Main Controller PCB.
They can be removed as follows.
Type 1:
1. Raise the Fixation Member [1].
2. Lift and remove the Flat Cable [2].
[1]
Type 2:
1. Pull out the Fixation Member [1].
2. Pull out the Flat Cable [2].
[1]
4-98
[2]
F-4-237
[2]
F-4-238
4-98