Removing The Secondary Transfer High-Voltage Pcb; Developing High-Voltage Pcb Unit - Canon imageRUNNER C1335 Series Service Manual

4
Disassembly/Assembly > Controller System > Removing the Secondary Transfer High-voltage PCB/Developing High-voltage PCB Unit > Procedure

Removing the Secondary Transfer High-voltage PCB/

Developing High-voltage PCB Unit

■ Preparation
1) Remove the Rear Cover 1(Refer to page 4-34).
■ Procedure
1) Remove the 5 connectors [1] and the 2 round shape terminals [2].
• 2 Screws [3]
5x
2x
4 Disassembly/Assembly > Controller System > Removing the Secondary Transfer High-voltage PCB/Developing High-voltage PCB Unit > Procedure
F-4-209
[1]
[2]
[1]
[3]
F-4-210
2) Free the harness [1] from the Harness Guides [A] and [B].
• 1 Reuse Band [2]
2x
[1]
4-88
[1]
[A]
[B]
F-4-211
4-88