Table of Contents
Advertisement
COPIER> ADJUST> CCD
MTF-S7
MTF value 7 setting: vert scan [DADF]
Details
Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case
• When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the service
label.
Display/adj/set range
0 to 100
Unit
1 %
Default value
100
MTF-S8
MTF value 8 setting: vert scan [DADF]
Details
Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case
• When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the service
label.
Display/adj/set range
0 to 100
Unit
1 %
Default value
100
MTF-S9
MTF value 9 setting: vert scan [DADF]
Details
Setting value for MTF filter coefficient calculation.
Enter the value of service label on the Reader.
Use case
• When replacing the Scanner Unit
• When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Caution
After the setting value is changed, write the changed value in the service
label.
Display/adj/set range
0 to 100
Unit
1 %
Default value
100
8
Service Mode > COPIER > ADJUST > CCD
8
Service Mode > COPIER > ADJUST > CCD
COPIER> ADJUST> CCD
OFST-CL0
Adj CIS-ch0 offset: color mode, 300 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 0 in
color mode with 300 dpi.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST-CL1
Adj CIS-ch1 offset: color mode, 300 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 1 in
color mode with 300 dpi.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST-CL2
Adj CIS-ch2 offset: color mode, 300 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 2 in
color mode with 300 dpi.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
OFST-CL3
Adj CIS-ch3 offset: color mode, 300 dpi
Details
To adjust the offset (black level) of the Scanner Unit on channel 3 in
color mode with 300 dpi.
Use case
When replacing the Main Controller PCB/clearing the Reader-related
RAM data
Adj/set/operate method 1) Enter the setting value and press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 255
Default value
216
Related service mode
COPIER> FUNCTION> CCD> CL-AGC
Supplement/memo
It is updated automatically when the value of CL-AGC is changed.
8-33
8-33
Advertisement
Table of Contents
Troubleshooting
