Disassembly/Assembly > Pickup/Feed System > Removing the Registration/Pickup Unit > Procedure after replacement When images with uneven density (white spots) are generated after re
2) Remove the Swing Guide [1].
• 2 Shafts [2]
[2]
3) Remove the Right Cover Harness Guide [1].
• 1 Connector [2]
• Harness Guide [A]
[2]
1x
4
Disassembly/Assembly > Pickup/Feed System > Removing the Registration/Pickup Unit > Procedure after replacement When images with uneven density (white spots) are generated after re
[1]
[2]
F-4-429
2x
[A]
[1]
F-4-430
4) Loosen the 2 screws [2] of the Registration/Pickup Unit [1].
2x
[2]
5) Lift the Registration/Pickup Unit [1], and tighten the 2 screws [2].