Table of Contents
Advertisement
COPIER> OPTION> FNC-SW
T-DLV-BK
Set Bk pre-toner low alarm notice timing
Details
To set the timing to notify the pre-toner low alarm for Bk-color (toner
level).
Use case
When changing the timing to notify the end of life according to the usage
status
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
Since toner level is calculated based on the developing supply count,
some errors may occur.
Display/adj/set range
0 to 40
Unit
1 %
Default value
It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> T-DLV-CL
T-DLV-CL
Set YMC pre-toner low alarm notice tmg
Details
To set the timing to notify the pre-toner low alarm for Y/M/C-color (toner
level).
Use case
When changing the timing to notify the end of life according to the usage
status
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
Since toner level is calculated based on the developing supply count,
some errors may occur.
Display/adj/set range
0 to 40
Unit
1 %
Default value
It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> T-DLV-BK
D-DLV-BK
Set Bk Drum auto delvry alarm notice tmg
Details
To set the timing to notify the auto delivery alarm for the Drum Unit (Bk).
Use case
When changing the timing to notify the end of life according to the usage
status
Adj/set/operate method 1) Enter the setting value, and then press Start key.
2) Turn OFF/ON the main power switch.
Caution
Since the drum is integrated with the Developing Assembly, some errors
may occur depending on the usage conditions.
Display/adj/set range
50 to 200
Unit
1 %
Default value
100
Related service mode COPIER> COUNTER> LF> K-DRM-LF
8
Service Mode > COPIER > OPTION > FNC-SW
8
Service Mode > COPIER > OPTION > FNC-SW
COPIER> OPTION> FNC-SW
D-DLV-CL
Set YMC Drum auto dvry alarm notice tmg
Details
To set the timing to notify the auto delivery alarm for the Drum Unit (Y/M/
C).
Use case
When changing the timing to notify the end of life according to the usage
status
Adj/set/operate method 1) Enter the setting value, and then press Start key.
2) Turn OFF/ON the main power switch.
Caution
Since the drum is integrated with the Developing Assembly, some errors
may occur depending on the usage conditions.
Display/adj/set range
50 to 200
Unit
1 %
Default value
100
Related service mode COPIER> COUNTER> LF> Y/M/C-DRM-LF
JM-ERR-D
Set of error display of 0CAx jam (DCON)
Details
To set whether to display "0CAF" jam as the error "E996-0CAF".
In the case of a jam, log cannot be obtained depending on the timing.
By selecting 1 when the jam "0CAF" occurs, it is displayed as the error
"E996-0CAF" so that the log can be obtained.
Use case
When obtaining a log at the occurrence of 0CAF jam
Adj/set/operate method Enter the setting value, and then press Start key.
Display/adj/set range
0 to 1
0: Display as a jam, 1: Display as an error
Default value
0
TNR-RS
Set of Toner Container rotation speed
Details
To set the rotation speed of Toner Container.
As the value is larger, the Toner Container rotates faster so enough
amount of toner is supplied for high duty (high image ratio) image, but
noise becomes louder.
Use case
• When the rotation drive noise is loud
• When not enough amount of toner is supplied for high duty image
Adj/set/operate method Enter the setting value, and then press Start key.
Display/adj/set range
-3 to 3
Unit
1
Default value
0
8-86
8-86
Advertisement
Table of Contents
Troubleshooting
