Table of Contents
Advertisement
COPIER> OPTION> BODY
NS-PLNWS
Limit PLAIN/LOGIN auth: SMTP auth encry
Details
To restrict use of PLAIN/LOGIN authentication, which is clear text, at
the time of SMTP authentication under the environment where the
communication packet is encrypted.
Use case
Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: SMTP server-dependent, 1: Not used
Default value
0
Supplement/memo
SMTP authentication: Protocol in which user authentication function is
added to SMTP, which is the protocol to be used for e-mail transmission.
At the time of e-mail transmission, this protocol executes authentication
of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
NS-LGN
Limit LOGIN authentication at SMTP auth
Details
To restrict use of LOGIN authentication at the time of SMTP
authentication.
Use case
Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: SMTP server-dependent, 1: Not used
Default value
0
Supplement/memo
SMTP authentication: Protocol in which user authentication function is
added to SMTP, which is the protocol to be used for e-mail transmission.
At the time of e-mail transmission, this protocol executes authentication
of the user account and the password between the SMTP server and the
user to approve e-mail transmission only when it's authenticated.
SLPMODE
Setting of shift to sleep mode
Details
To restrict shift to sleep mode 1/sleep mode 3.
When 1 is set, the machine does not shift to sleep mode.
Use case
When sleep failure occurs
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1
0: Shift is available., 1: Shift is not available.
Default value
0
8
Service Mode > COPIER > OPTION > BODY
8
Service Mode > COPIER > OPTION > BODY
COPIER> OPTION> BODY
SDTM-DSP
Setting of automatic shutdown menu display
Details
To set whether to display or hide "Auto Shutdown Time" in Settings/
Registration.
Use case
When switching to display or hide auto shutdown time
Adj/set/operate method Enter the setting value, and then press Start key.
Caution
Be sure to set 0 for the model with fax for Europe. If 1 is set, fax
reception cannot be performed normally.
Display/adj/set range
0 to 1
0: Hide, 1: Display
Default value
JP:0, USA:0, EUR:1, AU:0, CN:0, KR:0, TW:0, ASIA:0
Related UI menu
Preferences> Time/Energy Settings> AutoShutdown Time
RMT-SW
ON/OFF setting of RUI service mode function
Details
To set ON/OFF of RUI service mode function.
Use case
When setting ON/OFF of RUI service mode function
Adj/set/operate method 1) Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: OFF, 1: ON
Default value
1
PSWD-SW
Password type set to enter service mode
Details
To set the type of password that is required to enter when getting into
service mode.
2 types are available: one for "service technician" and the other for
"system administrator + service technician".
When selecting the type for "system administrator + service technician",
enter the password for service technician after the password entry by the
user's system administrator.
Use case
Upon request from the user who concerns security
Adj/set/operate method 1) Enter the setting value, and then press Start key.
2) Turn OFF/ON the main power switch.
Display/adj/set range
0 to 2
0: Password is not required (RUI service mode password only)
1: Password for service engineer is required
2: Passwords for service engineer and system administrator at user's
site are required
Default value
0
SM-PSWD
Password setting for service technician
Details
To set the password required to enter when the level is set to 1 or 2 in
PSWD-SW at the time of getting into service mode.
Use case
When the level is set to 1 or 2 in PSWD-SW at the time of getting into
service mode.
Adj/set/operate method 1) Enter the setting value, and then press Start key.
2) Turn OFF/ON the main power switch.
Caution
Be sure to select 1 or 2 with PSWD-SW in advance.
Display/adj/set range
1 to 99999999
Default value
11111111
Related service mode COPIER> OPTION> FNC-SW> PSWD-SW
8-83
8-83
Advertisement
Table of Contents
Troubleshooting
