4
Disassembly/Assembly > External Cover/Interior System > Removing the Right Cover Unit > Procedure
Removing the Right Cover Unit
■ Preparation
1) Remove the Rear Cover 1(Refer to page 4-34).
2) Remove the Right Rear Cover/Right Rear Lower Cover(Refer to page 4-38).
■ Procedure
CAUTION:
• Be sure not to touch the roller surface [A] of the Secondary Transfer Outer Roller
Unit when disassembling/assembling.
[A]
4
Disassembly/Assembly > External Cover/Interior System > Removing the Right Cover Unit > Procedure
F-4-70
F-4-71
CAUTION:
• Be careful not to drop the Right Cover Unit [1] when disassembling/assembling.
[1]
• Do not place the Right Cover Unit [2] directly on the floor after removing the Multi-
purpose tray [1]. This is because the Multi-purpose Tray Pickup Roller/Multi-purpose
Tray Feed Roller Unit [3] may be damaged.
[2]
[1]
4-41
F-4-72
[3]
F-4-73
4-41