Canon imageRUNNER C1335 Series Service Manual page 235

4
Disassembly/Assembly > Controller System > Removing the DC Controller PCB > Aftter Replacing
[2]
5x
[2]
NOTE:
The completed assembly of the DC Controller PCB is shown below.
■ Aftter Replacing
4 Disassembly/Assembly > Controller System > Removing the DC Controller PCB > Aftter Replacing
[1] [2]
F-4-202
F-4-203
Aftter Replacing 1) Restore the backup data.
Execute the following: COPIER > FUNCTION > VIFFNC > RSTR-DCN
2) When backup data cannot be uploaded before replacement due to reasons
such as damage of the DC Controller PCB, enter the value of each service
mode item described on the service label.
3) Turn OFF and then ON the power. (For accurate reflection of the restored
items)
4-85
T-4-83
4-85