Table of Contents
Advertisement
Menu List
COPIER> FUNCTION> SPLMAN
SPL14159
Fixing of USB device ID
Details
To fix the USB device ID to "000000000000".Driver for each machine
is installed to a PC. However, by fixing the serial number, the PC
considers that any connected machine to be the same machine;
thus, there will be no need to install the drivers many times.
Adj/set/operate method 1)Enter the value, and then press Start key.
2)Turn OFF/ON the main power switch.
Display/adj/set range
0 to 1 0: OFF, 1: ON
Default value
0
SPL65677
Increase of paper leading edge margin
Details
To increase the margin on the leading edge of paper.
As the value is incremented by 1, the margin is increased by 0.1 mm.
If the setting is incompatible with SPL68676 (decrease of margin),
the setting is disabled (the margin will be standard).
Adj/set/operate method 1)Enter the setting value, and then press Start key.
2)Turn OFF/ON the main power switch.
Display/adj/set range
0 to 20
Unit
0.1 mm
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL68676
SPL68676
Decrease of paper leading edge margin
Details
To decrease the margin on the leading edge of paper.
As the value is incremented by 1, the margin is decreased by 0.1
mm.
If the setting is incompatible with SPL65677(increase of margin), the
setting is disabled (the margin will be standard).
Adj/set/operate method 1)Enter the setting value, and then press Start key.
2)Turn OFF/ON the main power switch.
Display/adj/set range
0 to 20
Unit
0.1 mm
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL65677
SPL68677
Increase of paper right and left margins
Details
To increase the margins on the right and left edges of paper.
As the value is incremented by 1, the margin is increased by 0.1 mm.
If the setting is incompatible with SPL25607 (decrease of margins),
the setting is disabled (the margins will be standard).
Adj/set/operate method 1)Enter the setting value, and then press Start key.
2)Turn OFF/ON the main power switch.
Display/adj/set range
0 to 20
Unit
0.1 mm
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL25607
6
Troubleshooting > Special Management Mode > Menu List
6
Troubleshooting > Special Management Mode > Menu List
COPIER> FUNCTION> SPLMAN
SPL25607
Decrease of paper right and left margins
Details
To decrease the margins on the right and left edges of paper. As the
value is incremented by 1, the margin is decreased by 0.1 mm.If the
setting is incompatible with SPL68677 (increase of margins), the
setting is disabled (the margins will be standard).
Adj/set/operate method 1)Enter the setting value, and then press Start key. 2)Turn OFF/ON
the main power switch.
Display/adj/set range
0 to 20
Unit
0.1 mm
Default value
0
Related service mode
COPIER> FUNCTION> SPLMAN> SPL68677
SPL93822
Setting to avoid clearing of all department ID counts
Display/adj/set range
0 to 1
0: Allow clearing
1: Prohibit clearing
Default value
0
SPL78788
Setting to avoid clearing of department ID counts
Display/adj/set range
0 to 1
0: Allow clearing
1: Prohibit clearing
Default value
0
SPL71100
Setting of the duty of Off-hook PCB
Details
This is the mode to make handsets of particular manufacturers to be
rung when fax reception mode is set to "FAX/TEL switching".
Display/adj/set range
1 to 99
Default value
50
SPL00171
Change of the maximum value of auto sleep shift time
Display/adj/set range
0 to 10
0: 60 min.
1: Maximum value by model
Default value
1
SPL80100
Mask setting at copyboard scanning
Display/adj/set range
0 to 10
0: Mask value according to the specifications of each job
1: No mask (0 mm)
Default value
0
SPL27354
PC-less update, RMDS environment setting
Display/adj/set range
0 to 5
0: Production environment/Release environment
1: Production environment/Staging environment
2: Maintenance environment 1/Release environment
3: Maintenance environment 1/Staging environment
4: Maintenance environment 2/Release environment
5: Maintenance environment 2/Staging environment
Default value
0
6-13
6-13
Advertisement
Table of Contents
Troubleshooting
