Canon imageRUNNER C1335 Series Service Manual page 218

4
Disassembly/Assembly > Original Exposure/Feed System > Removing the ADF Unit + Reader Unit > Procedure
1) Remove the Connector Cover [1]
• 2 Hooks [2]
2) Remove the Main Controller Sub Cover [1].
• 3 Screw [2]
• 2 Hooks [3]
3x
[2]
4 Disassembly/Assembly > Original Exposure/Feed System > Removing the ADF Unit + Reader Unit > Procedure
[2]
[1]
[2]
F-4-152
[3]
[1]
[3]
F-4-153
3) Remove the Main Controller Cover [1].
• 1 Connectors [2]
• 6 Screw [3]
• 2 Hooks [4]
1x
6x
[4]
[3]
[2]
4) Disconnect the terminal [1] of the Grounding Wire.
• 1 Screw [2]
5) Remove the Flat Cable [3].
• Harness Guide [A]
• 1 Flat Cable Retainer [4]
6) Disconnect the 2 connectors [5].
• 1 Wire Saddle [6]
Note: How to remove the Flat Cable
1. Pull out the Fixation Member [1].
2. Pull out the Flat Cable [2].
[1]
4-68
[1]
[4]
F-4-154
[2]
F-4-155
4-68