debug l2vpn forwarding platform vpls all location
debug l2vpn forwarding platform vpls all location
To display debugging information about L2VPN forwarding Virtual Private LAN Service (VPLS) platform
of a specified location, use the debug l2vpn forwarding platform vpls all location command in EXEC
mode. To disable debugging, use the no form of this command.
debug l2vpn forwarding platform vpls all location location
no debug l2vpn forwarding platform vpls all location location
Syntax Description
location
Command Default
None
Command Modes
EXEC
Command History
Release
Release 5.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
root-system
Related Commands
Command
storm-control (l2vpn)
show l2vpn forwarding hardware ingress
detail location
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
246
Location to dispaly debugging information.
Modification
This command was introduced.
Operation
read, write
Description
Enables traffic storm control on a bridge router, bridge port EFP,
or access pseudowire.
Displays the hardware location information on the ingress detail
location.
Multipoint Layer 2 Services Commands