Debug Platform Packet Protocol Lacp - Cisco 4500M Command Reference Manual

debug platform packet protocol lacp

debug platform packet protocol lacp
To debug LACP protocol packets, use the debug platform packet protocol lacp command. To disable
debugging output, use the no form of this command.
Syntax Description
receive
transmit
vlan
Defaults
This command has no default settings.
Command Modes
Privileged EXEC
Command History Release
12.1(8a)EW
Examples
This example shows how to enable all PM debugging:
Switch# debug platform packet protocol lacp
Switch#
Related Commands
undebug platform packet protocol lacp (same as no debug platform packet protocol lacp )
Catalyst4500 Series SwitchCiscoIOS Command Reference—Release 12.2(18)EW
2-60
debug platform packet protocol lacp [receive | transmit | vlan]
no debug platform packet protocol lacp [receive | transmit | vlan]
(Optional) Enables platform packet reception debugging functions.
(Optional) Enables platform packet transmission debugging functions.
(Optional) Enables platform packet VLAN debugging functions.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Chapter2 Cisco IOS Commands for the Catalyst 4500 Series Switches
78-16201-01