Pw-Routing - Cisco ASR 9000 Series Reference Manual

Point to Point Layer 2 Services Commands

pw-routing

To enable pseudowire routing capabilities and enter the pseudowire routing configuration submode, use the
pw-routing command in the L2VPN routing configuration submode.

pw-routing

Syntax Description
This command has no keywords or arguments.
Command Default
None.
Command Modes
L2VPN routing configuration submode
Command History
Release
Release 5.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples
The following example shows how to enable pseudowire routing capabilities:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)#router-id 2.2.2.2
RP/0/RSP0/CPU0:router(config-l2vpn)# pw-routing
RP/0/RSP0/CPU0:router(config-l2vpn-pwr)# global-id 1000
RP/0/RSP0/CPU0:router(config-l2vpn-pwr)# bgp
RP/0/RSP0/CPU0:router(config-l2vpn-pwr-bgp)# rd 192.168.1.3:10
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operation
read, write
pw-routing
6.1.x
121