Cisco ASR 9000 Series Reference Manual page 677

Layer 2 Access List Commands
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
acl
Examples The following examples lists defined Ethernet services access list maximum thresholds:
RP/0/RSP0/CPU0:router# show access-lists ethernet-services maximum
Max configurable ACLs: 10000
Max configurable ACEs: 350000
RP/0/RSP0/CPU0:router# show access-lists ethernet-services maximum detail
Total ACLs configured: 2
Total ACEs configured: 3
Max configurable ACLs: 10000
Max configurable ACEs: 350000
The following example lists the Ethernet services access-list standby:
RP/0/RSP0/CPU0:router# show access-lists ethernet-services standby
ethernet-services access-list i
10 permit host 0001.0002.0003 host 000a.000b.000c
ethernet-services access-list l2_acl
10 permit any any
20 deny host 0002.0003.0004 host 000.50004.0003
The following example displays a summary of the number of Ethernet services ACLs configured on the
system:
RP/0/RSP0/CPU0:router# show access-lists ethernet-services summary
ACL Summary:
Total ACLs configured: 2
Total ACEs configured: 3
The following example displays the number of packets matching the access list l2_acl for each ACE:
RP/0/RSP0/CPU0:router# show access-lists ethernet-services l2_ACL hardware ingress location
0/0/CPU0
ethernet service access-list l2_acl
10 permit any any ( 3524 hw matches)
20 deny host 0002.0003.0004 host 0005.0004.0003 (5394 hw matches)
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
show access-lists ethernet-services
Modification
This command was introduced.
Operations
read, write
6.1.x
663