Point to Point Layer 2 Services Commands
xconnect group
To configure cross-connect groups, use the xconnect group command in L2VPN configuration mode. To
return to the default behavior, use the no form of this command.
xconnect group group-name
no xconnect group group-name
Syntax Description
group-name
Command Default
None
Command Modes
L2VPN configuration
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
You can configure up to a maximum of 16K cross-connects per box.
Note
Task ID
Task ID
l2vpn
Examples
The following example shows how to group all cross -connects for customer_atlantic:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# xconnect group customer_atlantic
Configures a cross-connect group name using a free-format 32-character
string.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write
xconnect group
6.1.x
227