Multipoint Layer 2 Services Commands
show l2vpn forwarding bridge-domain (VPLS)
To display information on the bridge that is used by the forwarding layer, use the show l2vpn forwarding
bridge-domain command in EXEC mode.
show l2vpn forwarding bridge-domain [ bridge-domain-name ] {detail| hardware {egress| ingress}}
location node-id
Syntax Description
bridge-domain-name
detail
hardware
egress
ingress
location node-id
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.7.2
Release 5.3.1
Release 5.3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
For each bridge, you can display summary information about the number of bridge ports, number of MAC
addresses, configured VXLANs and so forth.
(Optional) Name of a bridge domain.
Displays all the detailed information on the attachment circuits and
pseudowires.
Displays the hardware location entry.
Reads information from the egress PSE.
Reads information from the ingress PSE.
Displays the bridge-domain information for the specified location. The
node-id argument is entered in the rack/slot/module notation.
Modification
This command was introduced.
The show command output was enhanced to display VXLAN anycast
gateway parameters.
The show command output was enhanced to display MAC Move Counter
information.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
show l2vpn forwarding bridge-domain (VPLS)
6.1.x
341