interface (p2p)
Task ID
Task ID
l2vpn
Examples
The following example shows how to configure an attachment circuit on a TenGigE interface:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# xconnect group gr1
RP/0/RSP0/CPU0:router(config-l2vpn-xc)# p2p p001
RP/0/RSP0/CPU0:router(config-l2vpn-xc-p2p)# interface TenGigE 1/1/1/1
Related Commands
Command
p2p, on page 134
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
84
Operations
read, write
Description
Enters p2p configuration submode to configure point-to-point
cross-connects.
Point to Point Layer 2 Services Commands