Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

flood mode
Examples
The following example shows how to clear an L2VPN forwarding table from a specified location:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group MyGroup
RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain MyDomain
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# flood mode convergence-optimized
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)#
Related Commands
Command
l2vpn, on page 100
bridge-domain (VPLS), on page 240
bridge group (VPLS), on page 242

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x
80
Description
Enters L2VPN configuration mode.
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
Creates a bridge group so that it can contain bridge domains and
then to assign network interfaces to the bridge domain.
Point to Point Layer 2 Services Commands