Instance (Mstp) - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

instance (MSTP)

To enter the multiple spanning tree instance (MSTI) configuration submode, use the instance command in
MSTP configuration submode.
instance id
Syntax Description
id
Command Default
None
Command Modes
MSTP configuration
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
An instance ID of 0 represents the CIST for the region.
Note
Task ID
Task ID
interface
Examples The following example shows how to enter the MSTI configuration submode:
RP/0/RSP0/CPU0:router(config-mstp)# instance 101
RP/0/RSP0/CPU0:router(config-mstp-inst)#
Related Commands
Command
debug spanning-tree mst packet, on page 479
MSTI ID. Range is 0 to 4094.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write
Description
Enables debugging for sent and received MSTP packets.
instance (MSTP)
6.1.x
517