Multipoint Layer 2 Services Commands
Related Commands
Command
multicast p2mp, on page 291
vfi (VPLS), on page 380
bridge-domain (VPLS), on page 240
bridge group (VPLS), on page 242
l2vpn, on page 100
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
transport rsvp-te
Description
Configures point to multi-point
pseudowire in a VFI.
Configures virtual forwarding
interface (VFI) parameters.
Establishes a bridge domain and
enters L2VPN bridge group bridge
domain configuration mode.
Creates a bridge group so that it
can contain bridge domains and
then to assign network interfaces
to the bridge domain.
Enters L2VPN configuration mode.
6.1.x
377