Ethernet Ring G8032 Profile - Cisco ASR 9000 Series Reference Manual

Multipoint Layer 2 Services Commands

ethernet ring g8032 profile

To configure G.8032 ring profile and to enter the G.8032 ring profile configuration mode, use the ethernet
ring g8032 profilecommand in the global configuration mode. To disable the G.8032 ring profile, use the no
form of this command.
ethernet ring g8032 profile profile-name [non-revertive| timer {guard milliseconds| hold-off seconds| wtr
minutes }]
Syntax Description
non-revertive
timer
guard
hold-off
wtr
Command Default
None
Command Modes
Command History
Release
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Configures non-revertive ring instance.
Configures G.8032 timer.
Configures G.8032 guard timer. The Guard timer can be configured and
the default time interval is 500 ms. The time interval ranges from 10 to
2000 ms.
Configures G.8032 hold-off timer. The hold-off timer can be configured
and the default time interval is 0 seconds. The time interval ranges from
0 to 10 seconds.
Configures G.8032 WTR timer. The WTR timer can be configured by the
operator, and the default time interval is 5 minutes. The time interval ranges
from 1 to 12 minutes.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operation
read, write

ethernet ring g8032 profile

6.1.x
253