Instance Cost - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

instance cost

To set the internal path cost for a given instance on the current port, use the instance cost command in MSTP
interface configuration submode.
instance id cost cost
Syntax Description
id
cost
Command Default
The default path cost depends on the speed of the link.
Command Modes
MSTP interface configuration
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Note An instance ID of 0 represents the IST for the region.
Task ID
Task ID
interface
Examples The following example shows how to set the port cost to 10000 for the instance ID 101:
RP/0/RSP0/CPU0:router(config-mstp-if)# instance 101 cost 10000
MSTI ID. Range is 0 to 4094.
Port cost. Range is 1 to 200000000.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write
instance cost
6.1.x
519