recovery
RP/0/RSP0/CPU0:router(config-evpn-ac-timers)# recovery 50
RP/0/RSP0/CPU0:router(config-evpn-ac-timers)#
This example shows how to configure the recovery timer in the EVPN Timers configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# evpn
RP/0/RSP0/CPU0:router(config-evpn)# timers
RP/0/RSP0/CPU0:router(config-evpn-timers)# recovery 300
RP/0/RSP0/CPU0:router(config-evpn-timers)#
Related Commands
Command
evpn, on page 400
interface (EVPN), on page 410
timers, on page 458
flushagain, on page 404
peering, on page 422
programming, on page 425
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
428
Description
Enters EVPN configuration mode.
Enters the EVPN Interface configuration mode.
Configures timers that affect the convergence of PBB EVPN
in failure scenarios.
Configures the MAC flushagain timer.
Configures the peering timer.
Configures the programming timer.
Provider Backbone Bridge Commands