VXLAN Commands
Mcast Sync Group: 224.10.10.1
Mcast Flags: 0x1
The following shows an example output of the show interface nve command.
RP/0/RSP0/CPU0:router(config)# show interface nve nve1 detail
Interface: nve1, State:up, encapsulation:VXLAN
source-interface: Lo1 (primary:1.1.1.1, secondary:1.1.1.2)
VNI
10.10
11.10
mcast
VNI state
239.1.1.1
UP
239.1.1.1
UP
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
show nve interface
6.1.x
679