Show Ethernet Mvrp Status - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

show ethernet mvrp status

To display a summary of the VIDs that are declared or registered, and to learn the origin of these declarations,
use the show ethernet mvrp status command in EXEC mode.
show ethernet mvrp status [interface type interface-path-id]
Syntax Description
interface
type
interface-path-id
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Examples
The following sample output is from the show ethernet mvrp status command:
RP/0/RSP0/CPU0:router# show ethernet mvrp status interface GigabitEthernet 0/1/0/1
(Optional) Displays the MVRP state for the given subinterface or base interface
name.
(Optional) Interface type. For more information, use the question mark (?) online
help function.
(Optional) Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces currently
Note
configured on the router.
For more information about the syntax for the router, use the question mark (?) online
help function.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read
show ethernet mvrp status
6.1.x
583