Shutdown (Bridge Domain) - Cisco ASR 9000 Series Reference Manual

Multipoint Layer 2 Services Commands

shutdown (Bridge Domain)

To shut down a bridge domain to bring the bridge and all attachment circuits and pseudowires under it to
admin down state, use the shutdown command in L2VPN bridge group bridge domain configuration mode.
To re-enable the bridge domain, use the no form of this command.
shutdown
no shutdown
Syntax Description
This command has no keywords or arguments.
Command Default
By default, the bridge is not shutdown.
Command Modes
L2VPN bridge group bridge domain configuration
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
When a bridge domain is disabled, all VFIs associated with the bridge domain are disabled. You can still
attach or detach members to or from the bridge domain as well as the VFIs associated with the bridge domain.
Task ID
Task ID
l2vpn
Examples
The following example shows how to disable the bridge domain named bar:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group 1
RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain bar
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# shutdown
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write

shutdown (Bridge Domain)

6.1.x
361