Show L2Vpn Bridge-Domain (Vpls) - Cisco ASR 9000 Series Reference Manual

show l2vpn bridge-domain (VPLS)

show l2vpn bridge-domain (VPLS)

To display information for the bridge ports such as attachment circuits and pseudowires for the specific bridge
domains, use the show l2vpn bridge-domain command in EXEC mode.
show l2vpn bridge-domain [autodiscovery | bd-name bridge-domain-name | brief | detail | group
bridge-domain-group-name | hardware | interface type interface-path-id | pw-id value ] neighbor IP-address
[pw-id value | pbb | summary]
Syntax Description
autodiscovery
bd-name
bridge-domain-name
brief
detail
group bridge-domain-
group-name
hardware
interface type
interface-path-id
neighbor ip-address
pw-id value
pbb
summary
Command Default
None
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
318
(Optional) Displays BGP autodiscovery information.
(Optional) Displays filter information on the bridge-domain-name. The
bridge-domain-name argument is used to name a bridge domain.
(Optional) Displays brief information about the bridges.
(Optional) Displays detailed information about the bridges. Also, displays the
output for the Layer 2 VPN (L2VPN) to indicate whether or not the MAC
withdrawal feature is enabled and the number of MAC withdrawal messages
that are sent or received from the pseudowire.
(Optional) Displays filter information on the bridge-domain group name. The
bridge-domain-group-name argument is used to name the bridge domain group.
(Optional) Displays hardware information.
(Optional) Displays the filter information for the interface on the bridge domain.
Use the show interfaces command to see a list of all interfaces
Note
currently configured on the router.
For more information about the syntax for the router, use the question mark
(?) online help function.
(Optional) Displays the bridge domains that contain the pseudowires to match
the filter for the neighbor. The ip-address argument is used to specify IP address
of the neighbor.
(Optional) Displays the filter for the pseudowire ID. The range is from 1 to
4294967295.
(Optional) Displays provider backbone bridge information.
(Optional) Displays the summary information for the bridge domain.
Multipoint Layer 2 Services Commands