Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

show spanning-tree repag
VLAN 10
VLAN 20
Related Commands
Command
debug spanning-tree repag packet, on page
493
show spanning-tree repag bpdu interface, on
page 619
show spanning-tree repag topology-change
flushes, on page 621
spanning-tree repag, on page 633

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x
618
Preempt delay is disabled.
Sub-interface: GigabitEthernet0/0/0/1.20 (Up)
Max Age: 20
Root Priority: 0
Root Bridge: 0000.0000.0000
Cost: 0
Bridge Priority: 32768
Bridge ID: 6161.6161.6161
Port Priority: 128
Port ID: 1
Hello Time: 2
Active: no
BPDUs sent: 0
Topology Changes: 123
Multiple Spanning Tree Protocol Commands
Description
Enables Resilient Ethernet Protocol (REP) Access Gateway
debugging commands.
Displays BPDU information from root (bridge ID, cost, and
priority) and the BPDU information being sent on the port.
Displays details of the last topology change that occurred for
each pair of port and instance.
Enters the Resilient Ethernet Protocol Access Gateway
(REPAG) configuration submode.