Interface (Pvstag/Pvrstag) - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

interface (PVSTAG/PVRSTAG)

To enter PVST or PVRST Access Gateway Interface configuration submode and to enable either PVSTAG
or PVRSTAG for the specified port, use the interface command in PVST and PVRST Access Gateway
configuration submode.
interface {GigabitEthernet| TenGigE} instance
Syntax Description
instance
Command Default
None
Command Modes
PVSTAG and PVRSTAG configuration
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
A given port may only be enabled with one of MSTP, MSTAG, REPAG, PVSTAG or PVRSTAG.
Task ID
Task ID
ethernet-services
Examples
The following example shows how to enter the PVST or PVRST Access Gateway Interface configuration
submode:
RP/0/RSP0/CPU0:router(config-pvstag)# interface GigabitEthernet 0/0/0/1
RP/0/RSP0/CPU0:router(config-pvstag-if)#
Related Commands
Command
debug spanning-tree pvrstag packet, on
page 489
Forward interface in rack/slot/instance/port format.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write
Description
Enables packet debugging for sent and received PVRSTAG
packets.
interface (PVSTAG/PVRSTAG)
6.1.x
529